Donna has a new assistant. No, not for work – she retired, remember? She bought something she’s wanted for a while – a Shark IQ robotic vacuum cleaner. She actually wanted it for the new park model house when we move in, but she’s been using it in the motorhome. It’s an amazing device.

It docks in a charging station – it’s battery operated. When it’s activated, it relies on a number of sensors as it finds its way around the floor. It will transition from hard floor surface to rug or carpet with ease. It can work in tight spaces such as around chair legs or tables.

It stores information in its memory and becomes more efficient as it “learns” the layout of the floorplan. When it finishes the task – about half an hour for the motorhome – it docks itself in the charger to recharge for the next use! Since it’s a Shark, Donna dubbed it Jaws.

I don’t think it will take much more time to vacuum the park model home – it’s twice the square footage but it’s also more wide-open allowing longer straight runs without a lot of maneuvering.

You might recall back in the beginning of November that I took our coach to Rocky Mountain Cummins Avondale shop on the westside of Phoenix. When they completed the lift-pump replacement, I felt I’d been taken. They overcharged for the work, including charges for work that wasn’t even performed. I filed a complaint with the Arizona Attorney General’s Consumer Protection Division since I couldn’t get any satisfaction from Rocky Mountain Cummins.

The Consumer Protection Division basically just forwarded my complaint to the Cummins Corporate office. They, in turn, sent it to their legal counsel which responded by writing a letter stating they did nothing wrong. I countered their argument with another filing – their position was not justified.

Last week, a representative of Cummins phoned me and we talked it over. He agreed that a compromise solution should be made. He made me an offer I couldn’t refuse. I just have to go to the Cummins shop in west Mesa and sign a release and they will refund me $606. A good ending to a bad experience.

Last week, Donna made an oven-roasted boneless chicken thigh recipe with a balsamic dijon garlic sauce. She served it over brown rice with French green beans with everything bagel seasoning. It was delicious – I loved the sauce.

I think I said in my last post that experts, like author Kevin Kent, say most home cooks should have a selection of six knives or so. I’m getting there. I ordered another knife, bringing me up to five Japanese kitchen knives.

This time I ordered a petty. A petty is a small knife, usually ranging from 80mm to 180mm. The shorter size is for paring fruits or vegetables in your hand while longer pettys can used for board work. I ordered a 135mm petty from Japanese Chef Knives (JCK) in Tokyo, Japan.

This knife is from the Fu-Rin-Ka-Zan line and it’s made from a core of Hitachi Shirogami #1, also known as White steel #1 clad in soft stainless steel. The White steel #1 is a fine grained simple carbon steel without alloying elements and it takes a wicked sharp edge. The stainless cladding is unspecified, but I think it’s likely a SUS 410 series stainless like the stuff used on microwave oven or refrigerator doors.

This blade was hand forged by Teruyasu Fujiyama in Tokyo, Japan. Teru, or TF as he’s often referred to, is quite a character. He is a fourth generation blacksmith. In the 1970s, he and his father pioneered the art of cladding carbon steel by forge welding stainless steel to it. They had to experiment a lot before they got it right – 80% of the time they failed as the steel either delaminated or cracked. But they eventually got it right. TF is one of the very few blacksmiths that still make san-mai (three-layer) steel by hand forging. Most buy pre-laminated steel from the Hitachi YSS division or from Takefu Special Steel Company.

He makes three lines of knives, ranging from the value-priced Nashiji line to the mid-price Maboroshi and the premium line called Denka. I’ve read a lot about his work and a lot of knife aficionados complain about the lack of fine finish and fitment of handles on some of his work. Then they all rave about the fine heat treatment and geometry resulting in hard, durable blades with incredible cutting ability. It seems TF is rightly proud of his ability to forge great steel, but doesn’t care so much about a few stray grind marks or handle fitment. But the knife-crazy guys will pay upwards of a $1,000 for his top line stuff.

The JCK Fu-Rin-Ka-Zan line is their house brand and the particular knife I bought is sourced from the TF Nashiji line. I used it last night to slice an apple and it does have an incredibly smooth cutting feel. I also ordered a saya (wooden sheath) for safe storage. The simple magnolia wood saya was shown as available when I placed the order, but somehow it was out of stock when they picked the order. Koki-san at JCK took care of me though. He upgraded to the premium lacquer saya at no extra cost – it’s twice the price of plain magnolia!

We had some rain on Monday and Tuesday as a cold front came through. It was much cooler with the thermometer hovering around 60 for the daily highs. We had Midget-san under cover for a week when we finally had a warm, dry day yesterday. I uncovered it and found a dead battery! Something was drawing current from the battery. I put a charger on it. Then our neighbor, Chuck, brought over his charger with a boost function for starting.

I got the car fired up and Donna and I drove over to Basha’s for a few groceries and we picked up takeout from J&M – our favorite Chinese restaurant in the area. It’s amazing how affordable Chinese takeout is – we both had kung pao chicken with rice, spring roll, two crab puffs and soup for $12.50 per plate. And the portions were large enough for each of us to have a second meal of leftovers!

I got back on the pickleball courts Thursday and again this morning. My back is holding up fine. I planned to rest over the weekend, but they needed a player to fill out round-robin play tomorrow, so I’m in. It looks like we’ll end the month with fine weather. The temperature is predicted to be 70 or higher for the next several days.

*Just so you know, if you use this link to shop on Amazon and decide to purchase anything, you pay the same price as usual and  I’ll earn a few pennies for the referral. It’ll go into the beer fund. Thanks!