It seems like there was a lot going on over the weekend. I got a couple of things done that have been on my “to do” list for too long. First of all, on Friday I gave the exterior of Midget-San the full treatment. I’ve never been one to put much stake into products that claim to make wondrous results with little or no effort. If it seems to good to be true, it probably doesn’t work.

Awhile back, I was talking to guy at a car show. His car had a very shiny finish – the paint was glassy looking. He told me he never washes it with soap and water and had never put a water hose to it. He only used spray-on – wipe-off type cleansers that cleaned and shined the paint and also protected it. Really?

Well, in the year we’ve had Midget-San, I’ve never washed it with soap and water and haven’t put a water hose to it. First, I clean the exterior with Meguiar’s Ultimate Waterless Wash and Wax. I spray a small amount on and wipe it with a microfiber cloth, then buff with a clean, dry microfiber cloth. It works great! I met Barry Meguiar once, a real car enthusiast. He seemed a bit like a used car salesman with a white belt and matching white leather shoes, but he was a really nice guy. He no longer owns the company – 3M bought it – but I think he’s still involved with sales and distribution.

About every six weeks or so, I follow up with a ceramic spray coating that really makes the paint pop, leaves a hard, protective coating and fills minor scuffs and scratches. It’s super easy – the same as applying the Meguiar’s. I use Mother’s CMX Ceramic Coating.

Saturday was the Summer Solstice. This is the day when the sun is at its northernmost point in the sky and marks the beginning of summer in the northern hemisphere. It’s also the day with the longest period of sunlight – from now until December 21st, the period of sunlight will decrease daily.

Donna and I started out Saturday with another visit to the Cortez Farmers’ Market. We had a few items on our shopping list and found what we wanted there. The little square where the market is held has murals on the sides of some of the buildings there.

We decided to take a little drive after we left the market. We first stopped at Denny Lake on the east side of town. There’s a small park there and a trail around the lake that Donna has walked a few times.

We went east again on US160 and turned north at County Road 29 to get to Totten Reservoir. Totten Reservoir is much larger than Denny Lake and is a popular fishing spot.

We saw people splashing in the water and cooling off there. Continuing east on US160, we stopped at the McElmo Creek Flume overlook. A flume is defined as an artificial channel conveying water. In this case, the flume is a wooden channel bringing water from the Highline Ditch to irrigate land in the valley. The water came from the Dolores River. This path of water is no longer in use – it’s been replaced by the Towaoc-Highline Canal.

That concluded our tour for the day.

Sunday was Father’s Day. I didn’t celebrate it with anything special. I did get to another project that I’d put off long enough. The stainless steel double kitchen sink in our Alpine Coach is mounted beneath the Karadon countertop. To do this, they glued 3/4″ x 3/4″ lengths of wood under the countertop alongside of the sink opening so mounting tabs could be screwed in place in the wood.

Five years ago, I repaired the mounting by cleaning and re-gluing the wood. Well, cracks in the caulking around the sink was a sure sign that the wood mounts had worked loose again. Pounding down roads like US191 north of St. Johns will do that.

I scraped the old glue residue from the wood and countertop. Then I spritzed it with water to moisten the area before I glued the wood back in place. The expanding Gorilla glue I used is catalyzed by moisture – you need to dampen the contact surfaces to set the adhesive. Then I applied glue and braced the wood tightly against the countertop.

Before I did that, I spent about an hour removing the old caulking from around the sink and cleaning the surfaces. Once I had the sink mounts braced in place, I set about caulking the sink. Surface preparation is key when doing this type of work. Cleaning out the old caulk and cleaning the surface with rubbing alcohol did the trick.

While I had everything out of the cabinet under the sink, I replaced the filter on our purified water faucet. We use water from this faucet for making coffee and cooking. This filter is anti-bacterial (KDF) and is supposed to be good for 1,500 gallons. We average less than a gallon a day with it. Changing this filter is more difficult than it looks. It’s a long reach to the back of the cabinet.

Our regular fresh water supply is also filtered by a two-stage canister system.

Later, Donna and I went to Wild Edge Brewing Collective to meet up with an old high school buddy, Rocco Gerardi and his wife, Edita. I think the last time we were together was in 1982 or ’83. We had fun catching up over a couple of beers at a sidewalk table. I failed to get a photo though.

Donna made a couple of new dishes for dinner over the past week. There was grilled lemon-garlic chicken with garlic scapes served with fresh corn-on-the-cob.

And we each enjoyed a very thick pork chop from the Safeway store here in Cortez made from a recipe called “The Best Juicy Skillet Pork Chops.” It was very juicy and flavorful!

The weather has been hot and dry with temperatures around 90 degrees and humidity in the low teens. Really. The temperature right now is 90 and the humidity is 13%! The forecast calls for more of the same in the next several days.

*Just so you know, if you use this link to shop on Amazon and decide to purchase anything, you pay the same price as usual and  I’ll earn a few pennies for the referral. It’ll go into the beer fund. Thanks!